BAWC Forums

Post up what you need. I'll get to it when I get home tonight.

Yes. It's by the A key and below the Tab key.

[quote=""lawdogg""]Jeff, I need:

-Injector O-Rings[/quote]

Injector O-Rings that sit in the lower intake plenium.

K.O. Derf

[quote=""Gatecrasher""]K.O. Derf[/quote]

"Uh, it's Fred."

Still at work

[quote=""lawdogg""]Jeff, I need:

-Injector O-Rings (lower plenum)5
-Big & Small Crush Washers
-Tranny bolt (near t-housing)
-tranny bolt (smaller one, for rear tranny brace)
-water pump gasket
-oil return line gaskets2
-oil pickup tube
-oil pickup tube gasket
-rear main seal & housing
-oil pump -to-block gasket
-oil filter housing & gasket

Thanks! This is for a '94 VR-4.[/quote]The stuff in red i have. Qty is in green, otherwise i have full quantities

How soon do you need this stuff?

[quote=""jackhammer""]The stuff in red i have. Qty is in green, otherwise i have full quantities

How soon do you need this stuff?[/quote]

Sunday would be great! Donno how realistic that would be though.

[quote=""Monochrome""] Donno how realistic that would be though.[/quote]Not very.........unless i overnighted the stuff. No way on the bolts though, they are an hour away, couldnt get up there till this weekend. The other stuff i have here. I doubt anyone has the oil pickup or filter housing in stock anyway though

I need a part number too, if someone can get it for me.

I need the dimmer switch for the instrument panel.

Thanks homies.

Ok, hopefully this is what you need.

-Injector O-Rings (lower plenum) MD087060
-Big & Small Crush Washers
sm MF660063
lg MF660064
-Tranny bolt (near t-housing) MF301372 (I assume T is for thermostat?)
-tranny bolt (smaller one, for rear tranny brace) MS240217 (Hopefully this is what you need)
-water pump gasket MD356876
-water pump o-ring MD147332 2x I added this. If you're going to have the water pump off, you'll need a couple of these O-rings
-oil return line gaskets MD194403
-oil pickup tube MD158618
-oil pickup tube gasket MD183239
-rear main seal & housing MD178606 (kit, includes both pieces)
-oil pump -to-block gasket MD189778
-oil filter housing MD146168
& gasket MD189779

And for Mumbo...

I need the dimmer switch for the instrument panel. MB849470 (includes dark gray bezel)

Buy this piece used. It'll probably cost a fortune new.

[quote=""Gatecrasher""]And for Mumbo...

I need the dimmer switch for the instrument panel. MB849470 (includes dark gray bezel)

Buy this piece used. It'll probably cost a fortune new.[/quote]

Yeh, it's like $40 for that piece.

Mumbo, PM SeanVR4 on the board. He has one.

[quote=""jackhammer""]Not very.........unless i overnighted the stuff. No way on the bolts though, they are an hour away, couldnt get up there till this weekend. The other stuff i have here. I doubt anyone has the oil pickup or filter housing in stock anyway though[/quote]


except for this guy here <

[quote=""lawdogg""]Noice. Thanks dude. I think Cherry Hill gets orders in by Sat if you place them before Thurs so I'll order it all when I get off work today. [/quote]Dam i was only going to charge you for the o-rings and return gaskets too