LMFAO - 3SX "clutch release fork"

Telionis · Post by **Telionis** » Fri Mar 16, 2007 3:43 am

http://www.3sx.com/store/comersus_viewI ... duct=24723

Page says that an updated picture is coming soon w/ smilie... Awesome... good to see someone's got a sense of humor.

Jeff V. · Post by **Jeff V.** » Fri Mar 16, 2007 3:45 am

"We've come across instances of the stock fork warping"

Are they serious? That thing is a solid piece of cast iron. It's one of the most hard core parts in the driveline. WTF.

GTO Assassin · Post by **GTO Assassin** » Fri Mar 16, 2007 4:10 am

While on 3sx, a mate here in Oz had probs with a SPEC 2 clutch. He told 3sx and they said, "take some pics, we'll send them to SPEC and we will look after you on your next clutch." LOL - their 'looking after' was 3sx knocking a massive $35 off their shipping quote to Australia. So instead of $265 to send a farking clutch, they made it $230. Oh, you do too much for your customers 3sx!

Needless to say, I have got my friend to go elsewhere for a clutch!

Scotty

vr4 · Post by **vr4** » Fri Mar 16, 2007 4:46 am

i cant believe the fork bending either but ppl said they have done it.

oh...they have had that up for a year or so now.

oxrageous · Post by **oxrageous** » Fri Mar 16, 2007 1:27 pm

I don't know what you're talking about. 3sx has nothing but fair prices, both on their outstanding products and their shipping rates. IPO said so, and when he talks, you can chisel it in stone that it's the truth.

Hans_GZP · Post by **Hans_GZP** » Fri Mar 16, 2007 2:06 pm

The clutch fork may not warp/bend, but it can wear out at the pivot point. It happens all the time on DSM's and occassionally on 3s cars that aren't well maintained or don't have the parts installed properly when installing a new clutch or other new parts.

Monochrome · Post by **Monochrome** » Fri Mar 16, 2007 2:16 pm

The fork doesn't bend. The clip that holds it to the pivot ball does.

jackhammer · Post by **jackhammer** » Fri Mar 16, 2007 2:27 pm

[quote=""oxrageous""]3sx has nothing but fair prices,[/quote]Mirror, mirror on the wall, If full retail (or more in the case of a lot of oem stuff) is fair, then 3sx is the fairest of them all.

Daetlus · Post by **Daetlus** » Fri Mar 16, 2007 3:13 pm

[quote=""oxrageous""]I don't know what you're talking about. 3sx has nothing but fair prices, both on their outstanding products and their shipping rates. IPO said so, and when he talks, you can chisel it in stone that it's the truth.[/quote]

HAHA.

Since this isn't 3si OMG don't talk about teh performance shops....

Truth be told. I goto to IPS, grab their prices, and then have http://www.horsepowerfreaks.com price match it.

oxrageous · Post by **oxrageous** » Fri Mar 16, 2007 4:08 pm

I wouldn't buy from 3sx if I bought every existing 3S left on earth and they were the only shop.

jackhammer · Post by **jackhammer** » Fri Mar 16, 2007 4:11 pm

[quote=""oxrageous""]I wouldn't buy from 3sx if I bought every existing 3S left on earth and they were the only shop.[/quote]Well, that makes the sarcasm in this much easier to see

oxrageous wrote:I don't know what you're talking about. 3sx has nothing but fair prices, both on their outstanding products and their shipping rates. IPO said so, and when he talks, you can chisel it in stone that it's the truth.

GTO Assassin · Post by **GTO Assassin** » Fri Mar 16, 2007 4:14 pm

[quote=""oxrageous""]I wouldn't buy from 3sx if I bought every existing 3S left on earth and they were the only shop.[/quote]

Where would you keep them???

Scotty

oxrageous · Post by **oxrageous** » Fri Mar 16, 2007 4:17 pm

[quote=""GTO Assassin""]Where would you keep them???

Scotty[/quote]
I'd probably run them all off a cliff like lemmings.

Jeff V. · Post by **Jeff V.** » Fri Mar 16, 2007 4:22 pm

I'd probably run them all off a cliff like lemmings.

Sort of like this?

My_Car_Goes_Rar · Post by **My_Car_Goes_Rar** » Fri Mar 16, 2007 4:23 pm

I have to fess up... I ordered my power window assemblies from 3SX... theyre 100 dollars cheaper than anything I could find

GTO Assassin · Post by **GTO Assassin** » Fri Mar 16, 2007 4:27 pm

[quote=""Gatecrasher""]Sort of like this?

[/quote]

ROFL !

oxrageous · Post by **oxrageous** » Fri Mar 16, 2007 4:31 pm

[quote=""My_Car_Goes_Rar""]I have to fess up... I ordered my power window assemblies from 3SX... theyre 100 dollars cheaper than anything I could find

[/quote]
I recommend banning this member. He just put money in IPO's pockets.

My_Car_Goes_Rar · Post by **My_Car_Goes_Rar** » Fri Mar 16, 2007 4:33 pm

[quote=""oxrageous""]I recommend banning this member. He just put money in IPO's pockets.

[/quote]

eljefefx · Post by **eljefefx** » Fri Mar 16, 2007 6:07 pm

[quote=""oxrageous""]I recommend banning this member. He just put money in IPO's pockets.

[/quote]

What, it's not let IPO would use it to buy back a failed business venture from Steve.

Telionis · Post by **Telionis** » Fri Mar 16, 2007 7:12 pm

oxrageous wrote: I wouldn't buy from 3sx if I bought every existing 3S left on earth and they were the only shop.

[honda crab] Why no 3SX??? Maybe little 3SX??? [/honda crab]

BAWC Forums

LMFAO - 3SX "clutch release fork"

LMFAO - 3SX "clutch release fork"

Re: LMFAO - 3SX "clutch release fork"

Re: LMFAO - 3SX "clutch release fork"

Re: LMFAO - 3SX "clutch release fork"

Re: LMFAO - 3SX "clutch release fork"

Re: LMFAO - 3SX "clutch release fork"

Re: LMFAO - 3SX "clutch release fork"

Re: LMFAO - 3SX "clutch release fork"

Re: LMFAO - 3SX "clutch release fork"

Re: LMFAO - 3SX "clutch release fork"

Re: LMFAO - 3SX "clutch release fork"

Re: LMFAO - 3SX "clutch release fork"

Re: LMFAO - 3SX "clutch release fork"

Re: LMFAO - 3SX "clutch release fork"

Re: LMFAO - 3SX "clutch release fork"

Re: LMFAO - 3SX "clutch release fork"

Re: LMFAO - 3SX "clutch release fork"

Re: LMFAO - 3SX "clutch release fork"

Re: LMFAO - 3SX "clutch release fork"

Re: LMFAO - 3SX "clutch release fork"