It's finally done
Posted: Mon Apr 06, 2020 2:39 am
Page 1 of 33
Re: It's finally done
Posted: Mon Apr 06, 2020 3:17 am
5.3, 3.73s, and a gov-bomb
Re: It's finally done
Posted: Mon Apr 06, 2020 3:27 am
Gov bomb only thing I'm nervous about.
Other than that, almost completely rust free, pretty clean, new tires, heavy duty trailering package with transmission cooler, k&n high capacity intake, etc.
Needs new windshield and bed rail caps. Could use taillights, radio, and new speakers. Exhaust is ok but too loud for my taste.
Not going to complain about it though. $6500 out the door. 150k miles.
Other than that, almost completely rust free, pretty clean, new tires, heavy duty trailering package with transmission cooler, k&n high capacity intake, etc.
Needs new windshield and bed rail caps. Could use taillights, radio, and new speakers. Exhaust is ok but too loud for my taste.
Not going to complain about it though. $6500 out the door. 150k miles.
Re: It's finally done
Posted: Mon Apr 06, 2020 3:48 am
Code: Select all
AE7 Seats, front 40/20/40 split-bench, 3-passenger
AL0 Inflatable restraint
AM7 Seat, folding rear
AU0 Keyless entry, remote
AU3 Door locks, power programmable
A31 Windows, power
B30 Floor covering, color-keyed carpeting
B32 Floor mats, front
B33 Floor mats, rear
B8Z Prod week 50
B85 Moldings, bodyside
CJ3 Air conditioning, dual-zone, manual
C1U Fleet incentive, Enterprise Rent A Car
C49 Defogger, rear-window, electric
C7H GVWR, 6400 lbs. (2903 kg)
DF5 Mirror, inside rearview, electrochromic
DK7 Console, overhead mini
DL8 Mirrors, outside rearview, manual folding, power, heated, Black
EVA Dynamic vehicle test
E63 Pickup bed, Fleetside
FE9 Emissions, Federal requirements
FK2 Torsion spring, left
FK3 Torsion spring, right
FLT Fleet sales option
GMC Assembly plant Pontiac MI
GT4 Rear axle, 3.73 ratio
G80 Differential, locking, heavy-duty, rear
JC3 Brake, vacuum power assist
KNP Cooling, external transmission oil cooler
KUP Electronic throttle control
K34 Cruise control
K47 Air cleaner, high-capacity
K68 Alternator, 105 amps
LM7 Engine, Vortec 5300 V8 SFI
M30 Transmission, 4-speed automatic
NP2 Transfer case, floor-mounted shifter
NP5 Steering wheel, leather-wrapped rim
NT8 Emission system, Federal
PDU Sales item #137
PF9 Wheels, 4 - 16" x 7" (40.6 cm x 17.8 cm) brushed aluminum
QNK Tires, P245/75R16, all-season, blackwall
R6F Sales item #6
R9Z Sales item #100
TFD Retail amenities, delete
TR3 Grille, color-keyed surround
UB0 Sound system, ETR AM/FM stereo with CD player
UQ3 Enhanced speaker system
VB3 Rear step bumper
VG3 Front bumeper impact strip
VP6 Noise control
VQ2 Fleet program, dealer assistance
VR4 Trailer hitch, weight distributing
VXS Vehicle, complete
VX7 Fleet program, non-repurchase
V73 Vehicle statement, USA/Canada
XNK Tire, front. P245/75R16-109S BW R/PE ST TL ALS
X88 Market brand, Chevrolet
YD3 Axle, base equipment
YD6 Spring, rear
YE9 Convenience package, level 3
YNK Tire, rear. P245/75R16-109S BW R/PE ST TL ALS
ZNK Tire, spate. P245/75R16-109S BW R/PE ST TL ALS
ZY1 Paint, solid
Z82 Trailering equipment, heavy-duty
Z85 Suspension Package, Handling/Trailering
1SB Option package #2
1SZ Option package discount
59U Primary color. Silver Birch Metallic
6YH Suspension, front left
69D Trim combination, cloth
69I Interior trim, dark pewter
7YH Suspension, front right
Re: It's finally done
Posted: Mon Apr 06, 2020 4:00 am
the fuck does gov-bomb mean
Re: It's finally done
Posted: Mon Apr 06, 2020 4:27 am
Lsd rear end. Weak point. Tends to explode.
Re: It's finally done
Posted: Mon Apr 06, 2020 4:54 am
[quote=""Duck Vader""]Lsd rear end. Weak point. Tends to explode.[/quote]
Not an lsd. It's an actual mechanical locker but yes, very fragile.
Fed emissions. Nice.
Fwiw I do have a 10 bolt 8.625 series 3 clutch lsd around here somewhere. I think it's an Auburn.
Not an lsd. It's an actual mechanical locker but yes, very fragile.
Fed emissions. Nice.
Fwiw I do have a 10 bolt 8.625 series 3 clutch lsd around here somewhere. I think it's an Auburn.
Re: It's finally done
Posted: Mon Apr 06, 2020 6:34 am
That's what I meant. Not sure what long term plans are on this yet. If/when the g80 goes I'm not sure what I'll do.
That said, as long as the engine and transmission hold up, I might eventually pull them and put them in the jeep. Years down the road though.
In the meantime I need to get a list going of things I'd like to get done.
That said, as long as the engine and transmission hold up, I might eventually pull them and put them in the jeep. Years down the road though.
In the meantime I need to get a list going of things I'd like to get done.
Re: It's finally done
Posted: Mon Apr 06, 2020 10:53 am
Good job. It will make you happy!
Coop
Coop
Re: It's finally done
Posted: Mon Apr 06, 2020 4:09 pm
List of things I want to get done:
windshield - crack goes in front of my eyes
radio - going to add something with android auto
speakers - front drivers is going out and since upgrading radio would like something that sounds better - might add a subwoofer
double check all spark plugs/wire to see condition
clean/oil k&n filter
replace exhaust - really loud one on there now, want it quieter
bed rail caps - missing on it
bed liner - probably save up and do a spray in liner eventually, or buy a roller kit and do it myself like I did the tub of the LJ
replace front emblem
replace taillights - they work, but are cracking/faded and have dirt inside
bed cover - not sure what kind yet, tonneau or cap.
That is everything I can think of off the top of my head. I will post pictures later today.
windshield - crack goes in front of my eyes
radio - going to add something with android auto
speakers - front drivers is going out and since upgrading radio would like something that sounds better - might add a subwoofer
double check all spark plugs/wire to see condition
clean/oil k&n filter
replace exhaust - really loud one on there now, want it quieter
bed rail caps - missing on it
bed liner - probably save up and do a spray in liner eventually, or buy a roller kit and do it myself like I did the tub of the LJ
replace front emblem
replace taillights - they work, but are cracking/faded and have dirt inside
bed cover - not sure what kind yet, tonneau or cap.
That is everything I can think of off the top of my head. I will post pictures later today.
Re: It's finally done
Posted: Mon Apr 06, 2020 4:11 pm
This should keep you busy during quarantine.
Re: It's finally done
Posted: Mon Apr 06, 2020 4:11 pm
I start a new job 4/20, so just a couple of weeks of not doing much.
Re: It's finally done
Posted: Mon Apr 06, 2020 4:39 pm
Where are the pics?
Coop
Coop
Re: It's finally done
Posted: Mon Apr 06, 2020 4:44 pm
[quote=""DCIV""]Where are the pics?
Coop[/quote]
[quote=""Duck Vader""] I will post pictures later today.[/quote]
Coop[/quote]
[quote=""Duck Vader""] I will post pictures later today.[/quote]
Re: It's finally done
Posted: Mon Apr 06, 2020 4:51 pm
[quote=""DCIV""]Where are the pics?
Coop[/quote]
That was funny...coming from you. Duck just might be more photo challenged than yourself. Lol
Coop[/quote]
That was funny...coming from you. Duck just might be more photo challenged than yourself. Lol
Re: It's finally done
Posted: Mon Apr 06, 2020 4:52 pm
What is it, for those of us not in the know?
Re: It's finally done
Posted: Mon Apr 06, 2020 4:54 pm
Its a Shitty, oops, i meant Chevy. 
Re: It's finally done
Posted: Mon Apr 06, 2020 5:00 pm
We put a Kenwood DMX7706S in the Hummer. It was super easy. You truck should have similar wiring. The adapter wasn't too expensive.
Re: It's finally done
Posted: Mon Apr 06, 2020 7:48 pm
I'll put in something similar that allows a back up camera to be installed as well.
Re: It's finally done
Posted: Mon Apr 06, 2020 8:13 pm
I have an extra AA pioneer im trying to figure out what to do with