i lost that gay little resistor on the thing that hooks up to the PTU
Posted: Tue Jul 17, 2007 5:28 am
Fuck.
Where can I get a new one?
Where can I get a new one?
BAWC Forums
Let the shens continue...
https://bawcforums.org/phpbb/
i lost that gay little resistor on the thing that hooks up to the PTU
Page 1 of 1
Re: i lost that gay little resistor on the thing that hooks up to the PTU
Posted: Tue Jul 17, 2007 10:07 am
Junk yard, 3si, SeanVr4 on here...
Re: i lost that gay little resistor on the thing that hooks up to the PTU
Posted: Tue Jul 17, 2007 4:25 pm
Actually its a capacitor, and if your radio doesnt have any interference you dont really need it
Re: i lost that gay little resistor on the thing that hooks up to the PTU
Posted: Tue Jul 17, 2007 6:24 pm
So it could run with out it? My friend lost his in his NA and that thing was mis firing like a mofo.
Also, a bigger problem I have encountered is my A/C compressor tensioner pully is not going to work with my new 4 bolt block. I know you can modify it as John Monnin said on his website, but he didn't post any pictures of it and the directions are a little vauge. Does anybody know how to do it?
Also, a bigger problem I have encountered is my A/C compressor tensioner pully is not going to work with my new 4 bolt block. I know you can modify it as John Monnin said on his website, but he didn't post any pictures of it and the directions are a little vauge. Does anybody know how to do it?
Re: i lost that gay little resistor on the thing that hooks up to the PTU
Posted: Tue Jul 17, 2007 6:29 pm
As far as i know the only difference is the 'shaft' that one of the bolts goes through is much shorter on the 2nd gen, so in theory you could just cut yours shorter, but i dont know the exact dimension
Re: i lost that gay little resistor on the thing that hooks up to the PTU
Posted: Wed Jul 18, 2007 5:13 am
That capacitor is for filtering out electrical noise. Personally, I'd replace it at some point. There's not need to do it immediately though.
Re: i lost that gay little resistor on the thing that hooks up to the PTU
Posted: Wed Jul 18, 2007 5:20 am
[quote=""Twin-Turbo""]So it could run with out it? My friend lost his in his NA and that thing was mis firing like a mofo.
[/quote]
The next logical question is... what was he doing that he took off the noise filter/capacitor? He may need to recheck his work. I'd start by making sure you are 1000% certain he plugged the wires into the correct coils.
[/quote]
The next logical question is... what was he doing that he took off the noise filter/capacitor? He may need to recheck his work. I'd start by making sure you are 1000% certain he plugged the wires into the correct coils.
Re: i lost that gay little resistor on the thing that hooks up to the PTU
Posted: Wed Jul 18, 2007 10:34 pm
[quote=""Hannibalzero""]The next logical question is... what was he doing that he took off the noise filter/capacitor? He may need to recheck his work. I'd start by making sure you are 1000% certain he plugged the wires into the correct coils.[/quote]
I forgot, he didn't lose that and plug it in, he just didn't plug that thing in, and that is why it wasn't running correctly. But that was the past, and the NA runs great today (hence why I couldn't remember correctly)
Anyways, we found one, so problem solved.
I forgot, he didn't lose that and plug it in, he just didn't plug that thing in, and that is why it wasn't running correctly. But that was the past, and the NA runs great today (hence why I couldn't remember correctly)
Anyways, we found one, so problem solved.