This can only end poorly
Moderator: Monochrome
- Duck Vader
- Posts: 18726
- Joined: Mon Apr 30, 2007 3:57 am
Re: This can only end poorly
It only took me about 20 min. And that includes removing the wheel, caliper, ebrake line, upper control arm, and axle nut. Just needed to pop a pry bar in between the diff and cup and a gentle push and it came right out.
- tabasco122
- Posts: 18084
- Joined: Sun Sep 09, 2007 3:57 pm
- Location: Houma, LA
- Contact:
Re: This can only end poorly
mine was nothing to get to, i think i just had to disconnect the control arm, it was just stuck
I ended up putting a slide hammer weight on some allthread threaded into some vice grips lol

I ended up putting a slide hammer weight on some allthread threaded into some vice grips lol

scat1zzi
12:12 am: if the phone charger is a penis, and the chargy bit inside the phone is the vagina, i made my phones vagina prolapse on itself and cause catastrophic failure
[quote=""Seraflame""]Fear has nothing to do with it. It's a simple equation.
Is the shen I'm about to pull and the laughs that ensue = to or > the payback my wife is likely to impose? If yes. Shens. If no. Shens.[/quote]
12:12 am: if the phone charger is a penis, and the chargy bit inside the phone is the vagina, i made my phones vagina prolapse on itself and cause catastrophic failure
[quote=""Seraflame""]Fear has nothing to do with it. It's a simple equation.
Is the shen I'm about to pull and the laughs that ensue = to or > the payback my wife is likely to impose? If yes. Shens. If no. Shens.[/quote]
Click to show spoiler
- Duck Vader
- Posts: 18726
- Joined: Mon Apr 30, 2007 3:57 am
Re: This can only end poorly
Probably the last one of the season.
https://imgur.com/a/AvFGWPx#bfLwPro
Didn't hit the track last night. They were requiring drag tires only. No street tires. Pain in the ass track if you ask me. Guess I'll have to wait until next year.
https://imgur.com/a/AvFGWPx#bfLwPro
Didn't hit the track last night. They were requiring drag tires only. No street tires. Pain in the ass track if you ask me. Guess I'll have to wait until next year.
- Duck Vader
- Posts: 18726
- Joined: Mon Apr 30, 2007 3:57 am
Re: This can only end poorly
Almost done with the season of driving it. Maybe a couple of weeks left.
I'll do an oil change in the spring but wondering if there is anything else I can do to it during the winter.
Unless I pick up wider fenders and better seats, I'm not sure if there is much to do at this point.
I'll do an oil change in the spring but wondering if there is anything else I can do to it during the winter.
Unless I pick up wider fenders and better seats, I'm not sure if there is much to do at this point.
Re: This can only end poorly
Yea, im in the same boat. Not too many weeks left before i park the Chally.

- Chris GTO TT
- Posts: 15875
- Joined: Mon Sep 10, 2007 7:50 pm
- Location: Sacramento
Re: This can only end poorly
Meanwhile this is the time of the year where driving the WRX is fun 
Re: This can only end poorly
Is your car set up to run E85? I can't remember. Maybe look into doing the sensor setup to enable that if you don't have it already?
I think about all the things we could have done, all the miracles we could have achieved, if we were all just a little bit better than it turns out we are.
--Naomi Nagata
--Naomi Nagata
- tabasco122
- Posts: 18084
- Joined: Sun Sep 09, 2007 3:57 pm
- Location: Houma, LA
- Contact:
Re: This can only end poorly
its near impossible to get here in WA
at least not at a station

at least not at a station

scat1zzi
12:12 am: if the phone charger is a penis, and the chargy bit inside the phone is the vagina, i made my phones vagina prolapse on itself and cause catastrophic failure
[quote=""Seraflame""]Fear has nothing to do with it. It's a simple equation.
Is the shen I'm about to pull and the laughs that ensue = to or > the payback my wife is likely to impose? If yes. Shens. If no. Shens.[/quote]
12:12 am: if the phone charger is a penis, and the chargy bit inside the phone is the vagina, i made my phones vagina prolapse on itself and cause catastrophic failure
[quote=""Seraflame""]Fear has nothing to do with it. It's a simple equation.
Is the shen I'm about to pull and the laughs that ensue = to or > the payback my wife is likely to impose? If yes. Shens. If no. Shens.[/quote]
Click to show spoiler
- Duck Vader
- Posts: 18726
- Joined: Mon Apr 30, 2007 3:57 am
Re: This can only end poorly
What he said. I could have done it when I got the procharger put on, but damn near impossible to get here
Re: This can only end poorly
i live maybe .5mm above the "t" in portland, about 6 miles from the one station in portland, and will not go down there for e85
DOGE
- aaronatstate
- Posts: 9847
- Joined: Tue Apr 17, 2007 3:52 pm
- Location: Arkansas
Re: This can only end poorly
I live at the right dot and work at the left dot. There’s 2 stations in the town I work in that aren’t on that map for some reason.
https://imgur.com/a/LeiYQEP
https://imgur.com/a/LeiYQEP

Chr15t0ph3r85: YES
Chr15t0ph3r85: GOOO STATE
- Duck Vader
- Posts: 18726
- Joined: Mon Apr 30, 2007 3:57 am
Re: This can only end poorly
There is 1 by me. Maybe when I get my cam, torque converter, etc done I'll have them set me up for it. But that won't be for another year or two. Expensive.
It would be the btr cam, cam kit, btr top end rebuild, rocker arms, smaller pulley, flex fuel kit, circle d converter, etc. Then retune the engine and transmission. Would put me to over reliable 700rwhp but would cost about $12k after paying for the labor and everything.
It would be the btr cam, cam kit, btr top end rebuild, rocker arms, smaller pulley, flex fuel kit, circle d converter, etc. Then retune the engine and transmission. Would put me to over reliable 700rwhp but would cost about $12k after paying for the labor and everything.