Page 38 of 40
Re: Random car updates
Posted: Fri Jul 11, 2025 4:59 pm
by aaronatstate
Yes, when I replaced my RPS Max Street when I had the engine out last time (30k miles ago now), I did both the disk and the pressure plate.
Re: Random car updates
Posted: Fri Jul 11, 2025 5:08 pm
by DCIV
ChargerX3 wrote: ↑Fri Jul 11, 2025 4:52 pm
They also get warped from harsh heat cycles and general age. That affects engagement, wear patterns and life expectancy of your clutch.
I did lay a strait edge on it and it’s not warped.
I know you all are right. I just really have a hard time spending 200 more bucks when this thing isn’t driven much. So don’t take my questions on should I as you all are wrong. It’s honestly I havnt heard of many going bad and it’s always just been said “replace it”.
Coop
Re: Random car updates
Posted: Fri Jul 11, 2025 5:22 pm
by Chris GTO TT
DCIV wrote: ↑Fri Jul 11, 2025 4:50 pm
Yeah? Honest question, how? What brand? What did it do when it failed as far as driving?
Coop
I don't know what brand it was. It could have been the original one on my Maxima. One of the central fingers the throw out bearing broke and it didn't fully disengage anymore so in order to put it in gear from a stop I had to turn the car off. Then to shift I had to rev match.
Re: Random car updates
Posted: Fri Jul 11, 2025 5:24 pm
by Chris GTO TT
ChargerX3 wrote: ↑Fri Jul 11, 2025 4:52 pm
They also get warped from harsh heat cycles and general age. That affects engagement, wear patterns and life expectancy of your clutch.
Yeah every pressure plate I've seen out always had scortch marks on it.
Re: Random car updates
Posted: Fri Jul 11, 2025 5:31 pm
by DCIV
Gah. New TOB are 75 bucks.
Coop
Re: Random car updates
Posted: Fri Jul 11, 2025 5:39 pm
by alienviking
Dude - you spend more than $200 on any and every crazy idea you have! I'm not an expert (and mostly follow these threads to learn hah) but in the grand scheme $200 is peanuts to not have to worry about it! How much is your time away from the kids worth if you have to redo it?
Re: Random car updates
Posted: Fri Jul 11, 2025 5:45 pm
by DCIV
alienviking wrote: ↑Fri Jul 11, 2025 5:39 pm
Dude - you spend more than $200 on any and every crazy idea you have! I'm not an expert (and mostly follow these threads to learn hah) but in the grand scheme $200 is peanuts to not have to worry about it! How much is your time away from the kids worth if you have to redo it?
Don’t go making sense. Lol
Coop
Re: Random car updates
Posted: Fri Jul 11, 2025 5:50 pm
by ChargerX3
Coop you know you need to pony up for the whole clutch/pressure plate set. You also know you need to replace that TC seal. Just get it done and not have to worry for another decade or two.
Quit being a tight ass and ultimately robbing yourself from quality time down the road.
/motivational post that is also subconsciously directed at myself.
Re: Random car updates
Posted: Fri Jul 11, 2025 6:45 pm
by aaronatstate
Start "paying" yourself some hourly rate for your labor in your equations when you price things out. Like you want to save $200ish on a new pressure plate (a good one is probably a bit more honestly), but you'll be saving yourself 10-12 hours (or more) of labor.
Re: Random car updates
Posted: Fri Jul 11, 2025 6:56 pm
by DCIV
ChargerX3 wrote: ↑Fri Jul 11, 2025 5:50 pm
Coop you know you need to pony up for the whole clutch/pressure plate set. You also know you need to replace that TC seal. Just get it done and not have to worry for another decade or two.
Quit being a tight ass and ultimately robbing yourself from quality time down the road.
/motivational post that is also subconsciously directed at myself.
TC seal? You mean OS seal?
Coop
Re: Random car updates
Posted: Fri Jul 11, 2025 7:39 pm
by ChargerX3
Correct OS seal on trans.
Re: Random car updates
Posted: Fri Jul 11, 2025 9:28 pm
by alienviking
aaronatstate wrote: ↑Fri Jul 11, 2025 6:45 pm
Start "paying" yourself some hourly rate for your labor in your equations when you price things out. Like you want to save $200ish on a new pressure plate (a good one is probably a bit more honestly), but you'll be saving yourself 10-12 hours (or more) of labor.
This is kind of how I justify things haha. Based on my pay at work. Hence why it quickly becomes better to fly than drive to places!
Re: Random car updates
Posted: Fri Jul 11, 2025 10:00 pm
by DCIV
It’s just when does it end. Resurface the fly wheel, why not do the main seal while there. And I’ve been 100% guilty of suggesting such things….and doing them. That’s why my simple build turned into 3 plus years is all.
I just want honest advice if what’s real, what’s not.
Coop
Re: Random car updates
Posted: Fri Jul 11, 2025 10:17 pm
by ChargerX3
You are hands deep into the 2nd most complex and time consuming part of your vehicle. The only thing worse would be your lower end of your engine. For those two things you want to get it right and spend the small $ no matter what.
Re: Random car updates
Posted: Fri Jul 11, 2025 11:22 pm
by DCIV
The OS leak is sooooo small. It doesn’t bother me really. Lol. The case does not leak and I have a chance of it leaking when taking apart. Grrrrr.
Coop
Re: Random car updates
Posted: Sat Jul 12, 2025 4:35 am
by aaronatstate
I have never known anyone to only replace the clutch disk. Normally when you buy a “clutch” it’s the disk and pressure plate. Fine if you don’t wanna do the OS seal. Don’t do the rear main seal unless it’s leaking. Definitely do the TOB.
Re: Random car updates
Posted: Sat Jul 12, 2025 4:58 am
by tabasco122
yeah ive never heard of replacing one. theres a reason they come together
Re: Random car updates
Posted: Sat Jul 12, 2025 10:35 am
by DCIV
I’ve never heard of anyone replacing brake pads without turning the rotors till I was talking to some 3/s guys one year as well. And we arnt talking track only cars.
This stuff is done, just not talked about.
I will prob do all the above, I’m just bitching (not the rear main as it’s fine). We are leaving wed for New York so I don’t wanna order and parts sitting on the door step.
Coop
Re: Random car updates
Posted: Sat Jul 12, 2025 5:03 pm
by aaronatstate
DCIV wrote: ↑Sat Jul 12, 2025 10:35 am
I’ve never heard of anyone replacing brake pads without turning the rotors till I was talking to some 3/s guys one year as well. And we arnt talking track only cars.
This stuff is done, just not talked about.
I will prob do all the above, I’m just bitching (not the rear main as it’s fine). We are leaving wed for New York so I don’t wanna order and parts sitting on the door step.
Coop
Just because you can pad slap brakes doesn’t mean you should…
Re: Random car updates
Posted: Sat Jul 12, 2025 7:46 pm
by DCIV
aaronatstate wrote: ↑Sat Jul 12, 2025 5:03 pm
DCIV wrote: ↑Sat Jul 12, 2025 10:35 am
I’ve never heard of anyone replacing brake pads without turning the rotors till I was talking to some 3/s guys one year as well. And we arnt talking track only cars.
This stuff is done, just not talked about.
I will prob do all the above, I’m just bitching (not the rear main as it’s fine). We are leaving wed for New York so I don’t wanna order and parts sitting on the door step.
Coop
Just because you can pad slap brakes doesn’t mean you should…
I agree. I was just saying things are done without talking about it.
Coop
