BAWC Forums

Posted: **Fri Apr 17, 2020 10:23 pm**

Blacked out there bar? I like

Posted: **Fri Apr 17, 2020 11:03 pm**

Blacked bar and bow tie. Just left a little around the edge of the bow tie untouched so it would stand out.

Posted: **Sun Apr 19, 2020 12:56 am**

Tore off the outside door trim panel things. Thought I still had a 3m erase wheel but don't so have a bunch of two sided tape shit stuck on the sides. Lol. Ordered a new wheel and will clean it up and get pics towards the end of the week.

Keep debating on if I want to remove the side steps. Don't use them.

Posted: **Sun Apr 19, 2020 1:04 am**

I also kind of want to swap tires with the jeep. Lol. Both are same size but jeep ones are nicer.

Posted: **Sun Apr 19, 2020 1:43 am**

[quote=""Duck Vader""]I also kind of want to swap tires with the jeep. Lol. Both are same size but jeep ones are nicer.[/quote]

Swap them!

Coop

Posted: **Sun Apr 19, 2020 4:01 am**

Poor Jeep.

Posted: **Sun Apr 19, 2020 4:27 am**

Don't worry about the jeep. Will be driving it a couple times a week to keep it in decent shape.

Posted: **Sat Apr 25, 2020 12:28 am**

14.4 mpg. 75% city.

Posted: **Sat Apr 25, 2020 6:51 pm**

Radio and sub are in. Just need to make some adjustments to the amp. Also putting in a dash cam and installing rear view camera tonight.

Will post pics after all done.

Posted: **Sun Apr 26, 2020 1:18 am**

Back up camera.

Unit playing Android auto

Subwoofer under back seat

Dash cam

And finally, any ideas on how to get rid of these lines where the side trim molding was?

Used 3m eraser wheel to remove tape, goof off and goo gone to remove remaining residue. These outlines are still there.

Posted: **Sun Apr 26, 2020 2:20 am**

Anyone who goes to a junk yard, I'll pay you if you find a drivers side door latch assembly, mine works except for the electric signal to the truck that lets it know the door is open. So when I open the door the lights don't come on and the radio keeps playing.

Cheap part, but rather try oem.

Posted: **Sun Apr 26, 2020 2:21 am**

Not sure if it's the assembly or wire connection somewhere.

Need to get my hands on a fsm

Posted: **Sun Apr 26, 2020 2:47 am**

Is the radio stuff done? It looks like it’s missing it’s trim?

Coop

Posted: **Sun Apr 26, 2020 3:17 am**

I took pics mid install

Posted: **Sun Apr 26, 2020 3:44 am**

Interesting.

Found a service bulletin that might help with the door. Going to see if I can splice some wires together and see what happens.

Posted: **Sun Apr 26, 2020 3:59 am**

Damn. I wish I knew you needed parts. I was at two junkyards today.

Let me know how it ends up. There's plenty around.

Posted: **Sun Apr 26, 2020 4:06 am**

Tab says replace latch first. Then try splice

Posted: **Sun Apr 26, 2020 3:20 pm**

I think this is what I need.

https://www.amazon.com/dp/B00GUGRSQW/re ... PEbC3MA6E8

Just don't want to spend $140 and it not work.

Posted: **Sun Apr 26, 2020 3:30 pm**

I'll see what I can do.

Posted: **Sun Apr 26, 2020 4:25 pm**

Checked pick n pull for the local stuff. Didn't see much. Problem is there are a variety of types depending on what you have.

BAWC Forums

It's finally done

Re: It's finally done

Re: It's finally done

Re: It's finally done

Re: It's finally done

Re: It's finally done

Re: It's finally done

Re: It's finally done

Re: It's finally done

Re: It's finally done

Re: It's finally done

Re: It's finally done

Re: It's finally done

Re: It's finally done

Re: It's finally done

Re: It's finally done

Re: It's finally done

Re: It's finally done

Re: It's finally done

Re: It's finally done

Re: It's finally done