This can only end poorly
Moderator: Monochrome
- Chris GTO TT
- Posts: 15939
- Joined: Mon Sep 10, 2007 7:50 pm
- Location: Sacramento
Re: This can only end poorly
It's not a C7 that overheats after one hotlap *hides*
- Duck Vader
- Posts: 18806
- Joined: Mon Apr 30, 2007 3:57 am
Re: This can only end poorly
That said I might pick up some heat wraps and wrap around the trans lines. Really close to the headers. Like stupid close. Was hitting them at first but was able to move them a bit to get them off it, but not by much.
Re: This can only end poorly
That was the Z06.
I was only suggesting it because that's the first thing everyone recommends doing on GMs truck radiators with integrated trans coolers. Separating them increases reliability and prevents one system from negatively influencing the other.
My car has all that from the factory. Grand Sport + Z07. If I'm driving it like an old man, it sits right around 174*. My Stingray would sit around 205*, even after the radiator upgrade. People either buy or build a track package, then they don't drive it hard enough to use it, and instead they claim it "struggles to warm up". It the tune is right, it'll be just fine below 200 when you're idling around town. I have no doubt you'll be able to get yours good and toasty when the need arises.Jaosn wrote:People actually struggle getting things to warm up enough sometimes, especially if they opt for the engine oil cooler option.
I think about all the things we could have done, all the miracles we could have achieved, if we were all just a little bit better than it turns out we are.
--Naomi Nagata
--Naomi Nagata
- aaronatstate
- Posts: 9886
- Joined: Tue Apr 17, 2007 3:52 pm
- Location: Arkansas
Re: This can only end poorly
You definitely don't want to mix the fluids, so separating them out makes sense to me.

Chr15t0ph3r85: YES
Chr15t0ph3r85: GOOO STATE
- Chris GTO TT
- Posts: 15939
- Joined: Mon Sep 10, 2007 7:50 pm
- Location: Sacramento
Re: This can only end poorly
I know I'm just throwing bricks from my glass house
- Duck Vader
- Posts: 18806
- Joined: Mon Apr 30, 2007 3:57 am
Re: This can only end poorly
Hmm. Looking at extra trans coolers. Apparently it is hard to find a good location for one when you go s/c since you know, the intercooler and all. Going to do some digging and see what I can find.
- Duck Vader
- Posts: 18806
- Joined: Mon Apr 30, 2007 3:57 am
Re: This can only end poorly
Looks like it's common to remove the fog lights and put it there.
- aaronatstate
- Posts: 9886
- Joined: Tue Apr 17, 2007 3:52 pm
- Location: Arkansas
Re: This can only end poorly
Do people run remote ones in the rear with a fan? Instead of running lines to and from the front?

Chr15t0ph3r85: YES
Chr15t0ph3r85: GOOO STATE
- Duck Vader
- Posts: 18806
- Joined: Mon Apr 30, 2007 3:57 am
Re: This can only end poorly
Some do. Looking at that as well. But looks like up front is WAY better.
Might just wrap exhaust for now and keep an eye on temps, then look at installing something later.
Might just wrap exhaust for now and keep an eye on temps, then look at installing something later.
Re: This can only end poorly
We had a fire truck that had a trans cooler in the radiator. Radiator fluid was found in the trans and it ruined it. It was stupid expensive to replace.
Coop
Coop
[quote=""Melis""]The cop asked Coop "Are you really a firefighter?" Coop was like "yeah" then the cop said "ok your in charge" then the cop left
[/quote]
DCIV: first to 2,000,000 rep points
[/quote]
DCIV: first to 2,000,000 rep points
Re: This can only end poorly
I wonder if you could use the 2014 C7 6 speed cooler? You'd have to find some way to get airflow through it, but it might be a good place to start.
2015-2019 were 8 speed.
2015-2019 were 8 speed.
I think about all the things we could have done, all the miracles we could have achieved, if we were all just a little bit better than it turns out we are.
--Naomi Nagata
--Naomi Nagata
- alienviking
- Posts: 10704
- Joined: Tue Jun 05, 2007 7:41 pm
Re: This can only end poorly
I mean, you could just.. oh I don't know.. not supercharge it 
- alienviking
- Posts: 10704
- Joined: Tue Jun 05, 2007 7:41 pm
Re: This can only end poorly
I mean, you'll crush the $50K mark before you know it so I'll win anyway, so...
- Duck Vader
- Posts: 18806
- Joined: Mon Apr 30, 2007 3:57 am
Re: This can only end poorly
Only way I'd break 50 is if after the blower the transmission goes boom and I have one custom made for it.
Probably sitting at low 30s right now if I add it all up.
Probably sitting at low 30s right now if I add it all up.
- alienviking
- Posts: 10704
- Joined: Tue Jun 05, 2007 7:41 pm
Re: This can only end poorly
You will get there. We all believe in you.
- Duck Vader
- Posts: 18806
- Joined: Mon Apr 30, 2007 3:57 am
Re: This can only end poorly
You are just jealous...
- Chris GTO TT
- Posts: 15939
- Joined: Mon Sep 10, 2007 7:50 pm
- Location: Sacramento
- Duck Vader
- Posts: 18806
- Joined: Mon Apr 30, 2007 3:57 am
Re: This can only end poorly
Got the radiator in and like 95% of the connections back together. Went to do the last connection and the tee on the surge tank inlet hose basically disintegrated. Now I am going to do to the store and see if I can find a replacement. Apparently it is a 3/8 x 3/8 x 1/4 and not a common size easily found at auto parts stores from my checking their websites. Go figure.
Also lost more ATF than I wanted (had a plug in the line, but it failed) so lost probably about a cup or so worth on the floor from the lines, plus whatever is still in the old radiator. Unfortunately the C6 is a PAIN IN THE ASS to add fluid to and check. All done under the car and need to pump it in and everything. Checking level sucks too. Has to be at a certain temp and drip out of a plug at a certain rate in order for it to be considered full.
Anyway. Pics.


Also lost more ATF than I wanted (had a plug in the line, but it failed) so lost probably about a cup or so worth on the floor from the lines, plus whatever is still in the old radiator. Unfortunately the C6 is a PAIN IN THE ASS to add fluid to and check. All done under the car and need to pump it in and everything. Checking level sucks too. Has to be at a certain temp and drip out of a plug at a certain rate in order for it to be considered full.
Anyway. Pics.

