[quote=""tabasco122""]apparently a ft lb is one pound of force applied 1ft away from the fastener. So since it was 2-2.5ft of pipe, it would be about 600-750ftlbs lol.[/quote]
Damn. I thought it would be more.
Coop
Electric impacts
Moderator: Monochrome
Re: Electric impacts
[quote=""Melis""]The cop asked Coop "Are you really a firefighter?" Coop was like "yeah" then the cop said "ok your in charge" then the cop left 
[/quote]
DCIV: first to 2,000,000 rep points
[/quote]
DCIV: first to 2,000,000 rep points
-
alienviking
- Posts: 10692
- Joined: Tue Jun 05, 2007 7:41 pm
Re: Electric impacts
Subarus - screwed up by wannabe mechanics since 1972.
-
tabasco122
- Posts: 18082
- Joined: Sun Sep 09, 2007 3:57 pm
- Location: Houma, LA
- Contact:
Re: Electric impacts
Actually, the two guys who owned that wrx before me were both engineers and great mechanics lol, i doubt it was overtightened.
scat1zzi
12:12 am: if the phone charger is a penis, and the chargy bit inside the phone is the vagina, i made my phones vagina prolapse on itself and cause catastrophic failure
[quote=""Seraflame""]Fear has nothing to do with it. It's a simple equation.
Is the shen I'm about to pull and the laughs that ensue = to or > the payback my wife is likely to impose? If yes. Shens. If no. Shens.[/quote]
12:12 am: if the phone charger is a penis, and the chargy bit inside the phone is the vagina, i made my phones vagina prolapse on itself and cause catastrophic failure
[quote=""Seraflame""]Fear has nothing to do with it. It's a simple equation.
Is the shen I'm about to pull and the laughs that ensue = to or > the payback my wife is likely to impose? If yes. Shens. If no. Shens.[/quote]
Click to show spoiler
Re: Electric impacts
[quote=""Chris GTO TT""]What kind of tech is there on air compressors? 
[/quote]
Are you only talking air compressors or the whole lineup, including electric impacts?
[/quote]Are you only talking air compressors or the whole lineup, including electric impacts?
Re: Electric impacts
[quote=""mjannusch""]A crank bolt put on at around 150 ft/lbs shouldn't take 600+ to remove. ???
I mean think about that - that'd be like me (not a small guy) hanging on the end of a 3' long breaker bar and the bolt not even moving.[/quote]
One would think that... But try to pull off a virgin Honda crank bolt on a timing belt car. Not many impacts can do it.
[quote=""tabasco122""]shit gets tighter over time. The axle nuts on my first wrx i ended up breaking a breaker bar. The second one required my 300lb self bouncing on the end of a 24" cheater pipe. You do the math for how much force that required lol. Spec is 162ft-lbs. The stake on it also increases the torque needed to remove.[/quote]
[quote=""tabasco122""]Another good one is subaru cam gears. Ive stripped that shit out using a breaker bar more times than i can count, even with the proper fitted 10mm hex. Wont do them without an impact now lol.[/quote]
Truth. I've also stripped those bolts out with proper tools. They're fuckin tight.
I mean think about that - that'd be like me (not a small guy) hanging on the end of a 3' long breaker bar and the bolt not even moving.[/quote]
One would think that... But try to pull off a virgin Honda crank bolt on a timing belt car. Not many impacts can do it.
[quote=""tabasco122""]shit gets tighter over time. The axle nuts on my first wrx i ended up breaking a breaker bar. The second one required my 300lb self bouncing on the end of a 24" cheater pipe. You do the math for how much force that required lol. Spec is 162ft-lbs. The stake on it also increases the torque needed to remove.[/quote]
[quote=""tabasco122""]Another good one is subaru cam gears. Ive stripped that shit out using a breaker bar more times than i can count, even with the proper fitted 10mm hex. Wont do them without an impact now lol.[/quote]
Truth. I've also stripped those bolts out with proper tools. They're fuckin tight.
DOGE
Re: Electric impacts
[quote=""tabasco122""]apparently a ft lb is one pound of force applied 1ft away from the fastener. So since it was 2-2.5ft of pipe, it would be about 600-750ftlbs lol.[/quote]
[quote=""DCIV""]Damn. I thought it would be more.
Coop[/quote]
I'm getting 813 *nm with a 2footer and 1016 *nm for a 2.5footer. This is if you don't jump on it. I *think, again not physics major lol, that you can gain more force by jumping on it because gravity would accelerate you a little bit.
[quote=""DCIV""]Damn. I thought it would be more.
Coop[/quote]
I'm getting 813 *nm with a 2footer and 1016 *nm for a 2.5footer. This is if you don't jump on it. I *think, again not physics major lol, that you can gain more force by jumping on it because gravity would accelerate you a little bit.
Last edited by Toni on Fri Mar 05, 2021 2:08 pm, edited 1 time in total.
Reason: units fail
Reason: units fail
-
aaronatstate
- Posts: 9845
- Joined: Tue Apr 17, 2007 3:52 pm
- Location: Arkansas
Re: Electric impacts
[quote=""Toni""]I'm getting 813lbs with a 2footer and 1016 for a 2.5footer. This is if you don't jump on it. I *think, again not physics major lol, that you can gain more force by jumping on it because gravity would accelerate you a little bit.[/quote]
How did you get to those numbers?
It should just be 2ft*300lb for 600ft-lbs, and 2.5ft*300lb for 750ft-lbs shouldn't it?
How did you get to those numbers?
It should just be 2ft*300lb for 600ft-lbs, and 2.5ft*300lb for 750ft-lbs shouldn't it?
Chr15t0ph3r85: YES
Chr15t0ph3r85: GOOO STATE
Re: Electric impacts
[quote=""aaronatstate""]How did you get to those numbers?
It should just be 2ft*300lb for 600ft-lbs, and 2.5ft*300lb for 750ft-lbs shouldn't it?[/quote]
Oh yeah, now that you spell it out, it's obvious OOPS, 813 *nm and 1016 *nm. Which is the same haha. I would do well at NASA
It should just be 2ft*300lb for 600ft-lbs, and 2.5ft*300lb for 750ft-lbs shouldn't it?[/quote]
Oh yeah, now that you spell it out, it's obvious
OOPS, 813 *nm and 1016 *nm. Which is the same haha. I would do well at NASA -
aaronatstate
- Posts: 9845
- Joined: Tue Apr 17, 2007 3:52 pm
- Location: Arkansas
Re: Electric impacts
[quote=""Toni""]Oh yeah, now that you spell it out, it's obvious OOPS, 813 *nm and 1016 *nm. Which is the same haha. I would do well at NASA [/quote]
That's why that one Mars rover crashed Metric vs SAE units
OOPS, 813 *nm and 1016 *nm. Which is the same haha. I would do well at NASA [/quote]That's why that one Mars rover crashed
Metric vs SAE units Chr15t0ph3r85: YES
Chr15t0ph3r85: GOOO STATE
Re: Electric impacts
[quote=""aaronatstate""]That's why that one Mars rover crashed Metric vs SAE units [/quote]
https://youtu.be/SiNWnQYXifA
Metric vs SAE units [/quote]https://youtu.be/SiNWnQYXifA
DOGE
Re: Electric impacts
[quote=""Melis""]The cop asked Coop "Are you really a firefighter?" Coop was like "yeah" then the cop said "ok your in charge" then the cop left
[/quote]
DCIV: first to 2,000,000 rep points
[/quote]
DCIV: first to 2,000,000 rep points
-
Chris GTO TT
- Posts: 15871
- Joined: Mon Sep 10, 2007 7:50 pm
- Location: Sacramento
Re: Electric impacts
[quote=""ChargerX3""]Are you only talking air compressors or the whole lineup, including electric impacts?[/quote]
Just air compressors
Just air compressors
Re: Electric impacts
[quote=""Chris GTO TT""]Just air compressors[/quote]
It's not that there's tech in them. It's quality of materials.
That said I have that "ultra quiet" oilless harbor freight 27 gallon and it's quiet.
So far (I've only used it for a day) it's good. Decent airflow and recovery.
It's not that there's tech in them. It's quality of materials.
That said I have that "ultra quiet" oilless harbor freight 27 gallon and it's quiet.
So far (I've only used it for a day) it's good. Decent airflow and recovery.
DOGE
-
tabasco122
- Posts: 18082
- Joined: Sun Sep 09, 2007 3:57 pm
- Location: Houma, LA
- Contact:
Re: Electric impacts
Imma get a big husky two stage when I’m ready. Mainly for the warranty.
scat1zzi
12:12 am: if the phone charger is a penis, and the chargy bit inside the phone is the vagina, i made my phones vagina prolapse on itself and cause catastrophic failure
[quote=""Seraflame""]Fear has nothing to do with it. It's a simple equation.
Is the shen I'm about to pull and the laughs that ensue = to or > the payback my wife is likely to impose? If yes. Shens. If no. Shens.[/quote]
12:12 am: if the phone charger is a penis, and the chargy bit inside the phone is the vagina, i made my phones vagina prolapse on itself and cause catastrophic failure
[quote=""Seraflame""]Fear has nothing to do with it. It's a simple equation.
Is the shen I'm about to pull and the laughs that ensue = to or > the payback my wife is likely to impose? If yes. Shens. If no. Shens.[/quote]
Click to show spoiler
Re: Electric impacts
[quote=""tabasco122""]Imma get a big husky two stage when Im ready. Mainly for the warranty.[/quote]
My go to will be a 2 stage Ingersoll but I don't have a place for it so I figured this $330 one will do the job. If I get a year I'll be happy
My go to will be a 2 stage Ingersoll but I don't have a place for it so I figured this $330 one will do the job. If I get a year I'll be happy
DOGE
-
tabasco122
- Posts: 18082
- Joined: Sun Sep 09, 2007 3:57 pm
- Location: Houma, LA
- Contact:
Re: Electric impacts
yeah i saw one used for $800 on fb the other day, but im nowhere near ready for one.
scat1zzi
12:12 am: if the phone charger is a penis, and the chargy bit inside the phone is the vagina, i made my phones vagina prolapse on itself and cause catastrophic failure
[quote=""Seraflame""]Fear has nothing to do with it. It's a simple equation.
Is the shen I'm about to pull and the laughs that ensue = to or > the payback my wife is likely to impose? If yes. Shens. If no. Shens.[/quote]
12:12 am: if the phone charger is a penis, and the chargy bit inside the phone is the vagina, i made my phones vagina prolapse on itself and cause catastrophic failure
[quote=""Seraflame""]Fear has nothing to do with it. It's a simple equation.
Is the shen I'm about to pull and the laughs that ensue = to or > the payback my wife is likely to impose? If yes. Shens. If no. Shens.[/quote]
Click to show spoiler
Re: Electric impacts
Older hf compressors were alright but I’d put them on the lower end of the spectrum nowadays.
Re: Electric impacts
[quote=""tabasco122""]i have a video of me taking off staked axle nuts with the dewalt lol[/quote]
[quote=""vr4""]Staked nuts are still no problem for this thing. Rips them right off.[/quote]
https://youtu.be/N4LFWEcjaq4
[quote=""vr4""]Staked nuts are still no problem for this thing. Rips them right off.[/quote]
https://youtu.be/N4LFWEcjaq4
DOGE
-
tabasco122
- Posts: 18082
- Joined: Sun Sep 09, 2007 3:57 pm
- Location: Houma, LA
- Contact:
Re: Electric impacts
scat1zzi
12:12 am: if the phone charger is a penis, and the chargy bit inside the phone is the vagina, i made my phones vagina prolapse on itself and cause catastrophic failure
[quote=""Seraflame""]Fear has nothing to do with it. It's a simple equation.
Is the shen I'm about to pull and the laughs that ensue = to or > the payback my wife is likely to impose? If yes. Shens. If no. Shens.[/quote]
12:12 am: if the phone charger is a penis, and the chargy bit inside the phone is the vagina, i made my phones vagina prolapse on itself and cause catastrophic failure
[quote=""Seraflame""]Fear has nothing to do with it. It's a simple equation.
Is the shen I'm about to pull and the laughs that ensue = to or > the payback my wife is likely to impose? If yes. Shens. If no. Shens.[/quote]
Click to show spoiler