Mitsubishi Mighty Max

[ChargerX3]

[quote=""DCIV""]270rwhp


Coop[/quote]
Now your just being nice.
[quote=""vr4""]At the wheels? About 210[/quote]

Solid guess and I guessed 220 myself, but...

https://i.imgur.com/8j4aCkU.mp4


Yall were wrong and not even close.

[DCIV]

Did that say 172? Hmmmm.


Coop

[ChargerX3]

Too high. I did a couple runs and got it up to 154hp with the dump open. Way less than I was expecting. I don’t know if my tune is that bad or if the newly installed used mustang dyno is to blame.

Fun fact. I gained 8hp with the dump open vs running through the stock exhaust.

[Chris GTO TT]

Wow that's way too low given what the engine should be at. That's 42% drive train loss

[ChargerX3]

Yea, Im not sure what to think. He ran a few turbo powered guys as well as LS1 guys a week earlier and they came in a bit low too, but im even lower. Then guys joke that Mustangs read low, so I really dont know.

[vr4]

Mustang dynos are stingy.

Aren't you at elevation too?

[Duck Vader]

My mustang ran 400 rwhp on a dynojet. Mid 3s on a mustang if I remember right.

[ChargerX3]

[quote=""vr4""]Mustang dynos are stingy.

Aren't you at elevation too?[/quote]

So I hear but that’s a still a long ways off. 4,300 ft. Elevation

[vr4]

[quote=""ChargerX3""]So I hear but that’s a still a long ways off. 4,300 ft. Elevation[/quote]

DJ at sea level would put you right around where I said

[Duck Vader]

[quote=""Duck Vader""]My mustang ran 400 rwhp on a dynojet. Mid 3s on a mustang if I remember right.[/quote]

Double checked. 398 on a dynojet, 355 on a mustang. Similar conditions. That's a big difference.

[Chris GTO TT]

My Legacy did 250 whp and 310 wtq on a Mustang

[ChargerX3]

[quote=""vr4""]DJ at sea level would put you right around where I said[/quote]

50 hp between elevation and a dynojet?

[vr4]

[quote=""ChargerX3""]50 hp between elevation and a dynojet?[/quote]

Yep. I'd say you would pick up 50-60 if you used a DJ at sea level.


Obviously these are meaningless numbers. Truck still making the same power. Maybe 5-10 of that would be from elevation

[ChargerX3]

I guess the only real way to tell how powerful or fast this truck is to get some 1/4 mile passes in. It definitely feels quick, but it feels like it could still be quicker too.

[DCIV]

Did the graph show the clutch slipping at all? What gear did you dyno in? What were the air/fuel?


Coop

[ChargerX3]

Pretty sure the clutch is t an issue. It’s a new centerline stage 2. A/F readings showed between 11.5 to 12.5 in the upper RPM’s. Which makes me think I can lean up a bit. How far on NA I’m not certain.

[mjannusch]

Dynojet is high, Mustang is closer to reality IMO. Mustang and Dyno Dynamics are pretty close to each other on my cars.

[ChargerX3]

Update:

Been playing with the truck every so often. Picked up another set of identical Montero wheels for cheap at the junk yard but in 31" and without flat spots (that I currently have). I used my new Dewalt cordless impact. Soooo nice and easy!

Here is a shot of the 30's on the rear that ive been running and the newer 31's installed up front as well as lying on my driveway.


All done.



Truck rides so much smoother down the road now. No egg shaped tires and slightly less aggressive tread. Driving seems more enjoyable.

Also my friend who dyno'd my truck came back to me and said he messed up the dyno pull for me by not setting things up properly in the computer. Im hoping i can hook back up in the future, but he didn't make any promises.

[DCIV]

https://sacramento.craigslist.org/cto/d ... 98484.html

Step yo game up!


Coop

[ChargerX3]

That thing is all sorts impractical. Why the Isuzu axle vs Mitsubishi? Surprised he can register that thing in Commifornia.